Home Soldering & Tools SOLDERING EQUIPMENT 45W Mini-Type Soldering Station

45W Mini-Type Soldering Station

45W Mini-Type Soldering Station

Product Features:

Heater/Sensor Failure Detection:
If sensor circuit fails, the heater power is shut down.

Temperature "Lock-Out" feature:
The temperature can be locked with a password code.

ESD Safe and Spike Free circuitry:
The "Zero Voltage" electronic switching design protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.

Easy Park Iron Holder with Tip Cleaner: Made of low abrasive brass shavings instead of conventional "wet" sponges to extend tip life and reduce oxidation damage and no water is necessary.

The highly insulated "CeramicTech" heating element is engineered for safe operation and exceeds 100Mhoms in insulative capability. The LF-369D's specially designed heating element brings the temperature up to approximately 565-650°C (1050-1200°F), 115VAC/220VAC at full setting in about one minute. This results in very fast heat-up, instant recovery and superior heat transmission.

The ergonomic and slender soldering iron design with a comfortable rubber grip that prevents operator fatigue. The soldering iron is attached to the base unit using a non-burning silicone rubber cord. The tip is grounded through the power unit to ensure leakage of less that 0.4 milivolts, and a wide selection of long-lasting, iron clad, nickel/chrome plated and pre-tinned tips are available to meet all your soldering needs. Your LF-369D will ship with a standard tip: 44-510601, Waterless tip dresser, iron stand, and operating instructions. Electronic Temperature Controlled, Desktop Soldering Station The high power LF-369D electronically temperature controlled soldering station was specially designed and developed to meet the present and future Lead-free soldering needs of the electronic production industry. A temperature regulated soldering iron is essential for making consistent, reliable soldered connections. It provides all the benefits of temperature regulation and connects via a highly flexible burn-resistant cord, and can be easily adjusted in temperature. (150°C - 480°C )
Code XY-LF-369D  
Weight 3.00 lbs
 
Our price: $69.95
Quantity   
: *
: *
: *
Type the characters you see in the picture:


*
SILICON CONTROLLED RECTIFIER- 400VRM 35A 1/2 INCH PRESS FIT IGT=30AM IGT=30AM
POWER MOSFET N-CHANNEL 200V ID=30A TO-247 CASE HIGH SPEED SWITCH ENHANCEMENT MODE RDS=0.085 OHM
Big Easy Driver
SILICON CONTROLLED RECTIFIER- 400VRM 35A 1/2 INCH PRESS FIT IGT=30AM IGT=30AM POWER MOSFET N-CHANNEL 200V ID=30A TO-247 CASE HIGH SPEED SWITCH ENHANCEMENT MODE RDS=0.085 OHM Big Easy Driver
$9.11
$12.02
$24.99
 
DECORA IVORY PLATE 3 HOLE
SOLDERLESS TERMINALS., Spade 16-14AWG #6 Stud
SILICON CONTROLLED RECTIFIER 1600VRM 80A TO-65 IGT=100 MA
DECORA IVORY PLATE 3 HOLE SOLDERLESS TERMINALS., Spade 16-14AWG #6 Stud SILICON CONTROLLED RECTIFIER 1600VRM 80A TO-65 IGT=100 MA
$1.89
$8.95
$44.29
 
ZENER DIODE -180.0V 1/2W 5% DO-35
Needle-nosed Pliers
High Speed HDMI with Ethernet, male/male, 25FT
ZENER DIODE -180.0V 1/2W 5% DO-35 Needle-nosed Pliers High Speed HDMI with Ethernet, male/male, 25FT
$1.28
$9.99
$29.99

Product rating

Customer Reviews

There have been no reviews for this product.

Add your review here

: *
: *
Type the characters you see in the picture:


*